loader image

Slabline Ltd

Throughout the years, we’ve firmly established ourselves as leaders in the concrete slabs industry.

With 100 % New Zealand-made reinforcing steel and mesh products. With our help, your concrete foundations and structures will benefit from the strength of our skilled team. From initial estimations and detailing, to manufacturing and on-site placement, our complete service is with you until the job is done.

 We offer fabrication services in Auckland for construction sites, pre-casters, contractors, and builders. We go beyond simply fabricating and supplying stock – we also cut and bend reinforcing bar, produce cutting and bending schedules from construction drawings, and perform on-site placement.

Reinforcing Bar – Rebar

We offer a complete range of both grade 300E and 500E plain, deformed, and threaded reinforcing steel rebar. Each grade has a variety of diameters available.

All the steel rebar supplied is produced in New Zealand by Pacific Steel. Seismic® reinforcing bar, made by Pacific Steel, is made specifically to meet New Zealand’s unique seismic conditions, and is found in commercial, industrial, infrastructure and residential buildings.

Reinforcing Bar – Rebar

We offer a complete range of both grade 300E and 500E plain, deformed, and threaded reinforcing steel rebar. Each grade has a variety of diameters available.

All the steel rebar supplied is produced in New Zealand by Pacific Steel. Seismic® reinforcing bar, made by Pacific Steel, is made specifically to meet New Zealand’s unique seismic conditions, and is found in commercial, industrial, infrastructure and residential buildings.

Seismic® Grade 500E Bar

High tensile, high ductility plain carbon (micro-alloyed) steel for the reinforcing of concrete, available as plain and deformed rebars. This steel meets the demanding requirements of the seismic structural design methods employed in New Zealand as required by local Standards.

Grade 500E MA steel is identifiable by registered bar marks, can be threaded and galvanised, and can be hot re-bent (for procedures refer to NZS 3109).

Test Certificates are available for every production batch of this product.

Seismic® Grade 300E Bar

Higher ductility, lower tensile strength Grade 300E plain carbon steel for the reinforcing of concrete available as plain and deformed rebars. This steel meets the demanding requirements of the seismic structural design methods employed in New Zealand as required by local Standards.

Grade 300 steel is identifiable by registered bar marks and can be hot or cold bent (for procedures refer to NZS 3109)

Test Certificates are available for every production batch of this rebar product

Steel Range

  • Grade 300E Plain (R) – 6mm to 25mm
  • Grade 300E Deformed (D) – 10mm to 32mm
  • Grade 500E Plain (HR) – up to 20mm
  • Grade 500E Deformed (HD) – 10mm to 40mm
  • Grade 500E REIDBAR ( RB) 10mm-32mm

all reinforcing is available in 6m, 9m, 12m & 18m on order319695

Seismic® Grade 500E Bar

High tensile, high ductility plain carbon (micro-alloyed) steel for the reinforcing of concrete, available as plain and deformed rebars. This steel meets the demanding requirements of the seismic structural design methods employed in New Zealand as required by local Standards.

Grade 500E MA steel is identifiable by registered bar marks, can be threaded and galvanised, and can be hot re-bent (for procedures refer to NZS 3109).

Test Certificates are available for every production batch of this product.

Seismic® Grade 300E Bar

Higher ductility, lower tensile strength Grade 300E plain carbon steel for the reinforcing of concrete available as plain and deformed rebars. This steel meets the demanding requirements of the seismic structural design methods employed in New Zealand as required by local Standards.

Grade 300 steel is identifiable by registered bar marks and can be hot or cold bent (for procedures refer to NZS 3109)

Test Certificates are available for every production batch of this rebar product

Steel Range

  • Grade 300E Plain (R) – 6mm to 25mm
  • Grade 300E Deformed (D) – 10mm to 32mm
  • Grade 500E Plain (HR) – up to 20mm
  • Grade 500E Deformed (HD) – 10mm to 40mm
  • Grade 500E REIDBAR ( RB) 10mm-32mm

all reinforcing is available in 6m, 9m, 12m & 18m on order319695